76
RPS status LED
The S5560X-34S-EI and S5560X-54S-EI switches support RPS power input and use an RPS status
LED to indicate the RPS operating state.
Table 35 RPS status LED description
LED mark
Status
Description
RPS
Steady green
The RPS has normal AC input and DC output.
Steady yellow
The RPS has no or abnormal AC input.
Off
The RPS has no or abnormal DC output.
MODE LED
To show more information about the switch through the port status LEDs, the switch provides a
MODE LED to indicate the type of information that the port status LEDs are showing.
You can use the mode button to change the indication of the MODE LED.
Table 36 Description for the MODE LED
LED mark
Status
Description
MODE
Steady green
The port status LEDs indicate port rates.
Steady yellow
The port status LEDs indicate the duplex
mode of the ports.
Flashing green (1 Hz) (available only for
S5560X-30C-PWR-EI and
S5560X-54C-PWR-EI switches)
The port status LEDs indicate the PoE power
supply status of the ports.
Flashing yellow
The port status LEDs indicates the IRF
member ID of the switch. For example, if the
LEDs for ports 1 to 5 are steady green and
the other LEDs are off, the IRF member ID of
the switch is 5.
10/100/1000BASE-T autosensing Ethernet port LED
The switch provides a status LED for each 10/100/1000BASE-T autosensing Ethernet port. The port
LED and the mode LED work in conjunction to indicate the operating status of the
10/100/1000BASE-T autosensing Ethernet port.
Table 37 10/100/1000BASE-T autosensing Ethernet port LED description
Mode LED status
10/100/1000BASE-T
autosensing
Ethernet port LED
status
Description
Steady green (rate mode)
Steady green
A link is present on the port and the port is
operating at 1000 Mbps.
Flashing green
The port is sending or receiving data at 1000 Mbps
Steady yellow
The port is operating at 10/100 Mbps.
