7
Installation procedure
Remarks Installation diagram
6.
Install the switch in the
rack.
Required
See
Figure 13
. This figure uses
the mounting position near the
power modules as an example.
NOTE:
•
The depth of the rack must be a minimum of 1000 mm (39.37 in).
•
The S5800-54S switch has three grounding points, as shown in
Figure
19
. The primary grounding point and auxiliary grounding point 1 are
on the right side panel. If you use one of these grounding points, you
must connect the grounding cable to the grounding point before you
mount the switch in the rack.
Figure 8
Installing the mounting brackets near the power modules and
installing the chassis rails
Figure 9
Installing the mounting brackets near the ports and installing the
chassis rails
