12
Figure 17
Installing the switch in a rack
Mounting the switch on a workbench
CAUTION:
•
Ensure 10 cm (3.94 in) of clearance around the switch.
•
Do not place heavy objects on the switch.
If a standard 19-inch rack is not available, you can place you switch on a
workbench. The S5800-54S switch cannot be mounted on a workbench.
To mount the switch on a workbench:
1.
Make sure the workbench is clean and correctly grounded.
2.
Place the switch with bottom up carefully, and clean the round holes on
the chassis bottom with dry cloth.
3.
Attach the rubber feet to the four round holes in the chassis bottom.
4.
Place the switch with upside up on the workbench.
