14
Figure 20
Connect the grounding cable to the switch
2.
To connect the other end of the grounding cable to a grounding strip:
a.
Cut the grounding cable to a length according to the distance
between the switch and the grounding strip.
b.
Peel 5 mm (0.20 in) of insulation sheath from the end, and then
insert the naked metal part through the black insulation covering into
the end of the ring terminal.
c.
Secure the metal part of the cable to the ring terminal with a crimper,
and then cover it with the insulation covering.
d.
Heat the insulation covering with a blow dryer to let it completely
cover the metal part.
e.
Attach the ring terminal to the grounding post of the grounding strip,
and then secure it with a hex nut.
Figure 21
Connecting the other end of the grounding cable to the grounding
strip
