6-55
peer group (BGP/BGP-VPN instance view)
Syntax
peer
ip-address
group
group-name
[
as-number
as-number
]
undo peer
ip-address
group
group-name
View
BGP view, BGP-VPN instance view
Default Level
2: System level
Parameters
group-name
: Name of a peer group, a string of 1 to 47 characters.
ip-address
: IP address of a peer.
as-number
: AS number of the peer, in the range 1 to 4294967295.
Description
Use the
peer
group
command to add a peer to a peer group.
Use the
undo peer
group
command to delete a specified peer from a peer group.
By default, no peer is added into a peer group.
If you have specified an AS number for the peer to be added, make sure that the
as-number
argument
is consistent with the specified peer AS number.
If you have not created the peer to be added, the system automatically creates the peer when you
execute the command.
Examples
# In BGP view, add the peer 10.1.1.1 to the EBGP peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] group test external
[Sysname-bgp] peer test as-number 2004
[Sysname-bgp] peer 10.1.1.1 group test
# In BGP-VPN view, add the peer 10.1.1.1 to the EBGP peer group test (the VPN has been created).
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] group test external
[Sysname-bgp-vpn1] peer test as-number 2004
[Sysname-bgp-vpn1] peer 10.1.1.1 group test
peer ignore (BGP/BGP-VPN instance view)
Syntax
peer
{
group-name | ip-address
}
ignore
undo peer
{
group-name | ip-address
}
ignore
