9-19
Field
Description
Total
Total number of neighbors under the same state
display ospfv3 request-list
Syntax
display ospfv3
[
process-id
]
request-list
[ {
external
|
inter-prefix
|
inter-router
|
intra-prefix
|
link
|
network
|
router
|
grace
} [
link-state-id
] [
originate-router
ip-address
] |
statistics
]
View
Any view
Default Level
1: Monitor level
Parameters
process-id
: OSPFv3 process ID, in the range 1 to 65535.
external
: Displays the AS-external LSA information of the OSPFv3 link state request list.
inter-prefix
: Displays the Inter-area-prefix LSA information of the OSPFv3 link state request list.
inter-router
: Displays the Inter-area-router LSA information of the OSPFv3 link state request list.
intra-prefix
: Displays the Intra-area-prefix LSA information of the OSPFv3 link state request list.
link
: Displays the Link LSA information of the OSPFv3 link state request list.
network
: Displays the Network-LSA information of the OSPFv3 link state request list.
router
: Displays the Router-LSA information of the OSPFv3 link state request list.
grace
: Displays the Grace-LSA information of the OSPFv3 link state request list.
link-state-id
: Link state ID, in the format of an IPv4 address.
originate-router
ip-address
: Specifies the router ID of an advertising router.
statistics
: Displays the LSA statistics of the OSPFv3 link state request list.
Description
Use the
display ospfv3 request-list
command to display OSPFv3 link state request list information.
If no process is specified, the link state request list information of all OSPFv3 processes is displayed.
Examples
# Display the information of OSPFv3 link state request list.
<Sysname> display ospfv3 request-list
OSPFv3 Router with ID (11.1.1.1) (Process 1)
Interface Vlan1 Area-ID 0.0.0.0
--------------------------------------------------------------------------
Nbr-ID 12.1.1.1
LS-Type LS-ID AdvRouter SeqNum Age CkSum
Router-LSA 0.0.0.0 12.1.1.1 0x80000014 774 0xe5b0
