11-17
Table 11-8 display bgp ipv6 routing-table
command output description
Field
Description
Local router ID
Local router ID
Status codes
Status codes:
* – valid
> – best
d – damped
h – history
i – internal (IGP)
s – summary suppressed (suppressed)
S – Stale
Origin
i – IGP (originated in the AS)
e – EGP (learned through EGP)
? – incomplete (learned by other means)
Network Destination
network
address
PrefixLen Prefix
length
NextHop Next
Hop
MED MULTI_EXIT_DISC
attribute
LocPrf
Local preference value
Path
AS_PATH attribute, recording the ASs the packet has passed to avoid routing loops
PrefVal Preferred
value
Label Label
Origin attribute of the route, which can take on one of the following values:
i
Indicates that a route is interior to the AS.
Summary routes and the routes configured using the
network
command are considered IGP routes.
e
Indicates that a route is learned from the exterior gateway protocol
(EGP).
Ogn
?
Short for INCOMPLETE. It indicates that the origin of a route is unknown
and the route is learned by other means. BGP sets Origin attribute of
routes learned from other IGP protocols to INCOMPLETE.
