28
Installing the switch in a 19-inch rack
Installation methods
You can install the H3C S5820X Switch Series in a 19-inch rack by using load-bearing mounting brackets,
, and
Figure 17
Install an S5820X-26S switch in a 19-inch rack
Figure 18
Install an S5820X-28S switch in a 19-inch rack
Figure 19
Install an H3C S5820X-28C switch in a 19-inch rack
NOTE:
If a rack shelf is available, you can put the switch on the rack shelf, slide the switch to an appropriate
location, and fix the switch to the rack with mounting brackets.
Table 22
Install an S5820X-26S switch in the rack
Mounting bracket
position
Installing the
mounting brackets
Installing the chassis rails and
slide rails
Installing the
switch
•
Rear mounting (near
the power modules)
•
Front mounting (near
the network ports)
See "
chassis rails to the switch
chassis
."
Required.
See "
brackets and chassis rails to the
."
CAUTION:
The depth of the rack for the S5820X-26S switch must be 1000 mm (39.37 in).
