4-25
Neighbor Brief Information
Area: 0.0.0.0
Router ID Address Pri Dead-Time Interface State
1.1.1.2 1.1.1.2 1 40 Eth1/1 Full/DR
Table 4-11 display ospf peer
command output description
Field
Description
Area Neighbor
area
Router ID
Neighbor router ID
Address
Neighbor interface address
Pri
Neighboring router priority
Dead time(s)
Dead interval remained
Interface
Interface connected to the neighbor
State
Neighbor state: Down, Init, Attempt, 2-Way, Exstart, Exchange,
Loading or Full
display ospf peer statistics
Syntax
display ospf
[
process-id
]
peer
statistics
View
Any view
Default Level
1: Monitor level
Parameters
process-id
: OSPF process ID, in the range 1 to 65535.
Description
Use the
display ospf peer statistics
command to display OSPF neighbor statistics.
If no OSPF process is specified, OSPF neighbor statistics of all OSPF processes is displayed.
Examples
# Display OSPF neighbor statistics.
<Sysname> display ospf peer statistics
OSPF Process 1 with Router ID 10.3.1.1
Neighbor Statistics
Area ID Down Attempt Init 2-Way ExStart Exchange Loading Full Total
0.0.0.0 0 0 0 0 0 0 0 1 1
0.0.0.2 0 0 0 0 0 0 0 1 1
Total 0 0 0 0 0 0 0 2 2
