5-14
Table 5-5 display isis lsdb
command output description
Field
Description
LSPID
Link state packet ID
Seq Num
LSP sequence number
Checksum LSP
checksum
Holdtime
LSP lifetime which decreases as time elapses
Length LSP
length
ATT/P/OL
Attach bit (ATT)
Partition bit (P)
Overload bit (OL)
1 means the bit is set and 0 means the bit is not set.
SOURCE
System ID of the originating router
NLPID Network
layer
protocol
the originating router runs
AREA ADDR
Area address of the originating router
INTF ADDR
IP address of the originating router’s IS-IS interface
INTF ADDR V6
IPv6 address of the originating router’s IS-ISv6 interface
NBR ID
Neighbor ID of the originating router
IP-Internal
Internal IP address and mask of the originating router
IP-External
External IP address and mask of the originating router
IP-Extended
Extended IP address and mask of the originating router
COST Cost
HOST NAME
Dynamic host name of the originating router
ORG ID
Original system ID of the virtual system ID of the originating router
Auth Authentication
information
of the originating router
IPV6
Internal IPv6 address and prefix of the originating router
IPV6-Ext
External IPv6 address and prefix of the originating router
display isis mesh-group
Syntax
display isis mesh-group
[
process-id
|
vpn-instance vpn-instance-name
]