6-1
6
BGP Configuration Commands
z
The term
router
in this document refers to both routers and Layer-3 switches.
z
For more information about route policy configuration commands in this document, see
Route
Policy Configuration Commands
in the
Layer 3 - IP Routing Command Reference
.
BGP Configuration Commands
aggregate
Syntax
aggregate
ip-address
{
mask
|
mask-length
}
[
as-set
|
attribute-policy
route-policy-name
|
detail-suppressed
|
origin-policy
route-policy-name
|
suppress-policy
route-policy-name
] *
undo aggregate
ip-address { mask | mask-length }
View
BGP view, BGP-VPN instance view
Default Level
2: System level
Parameters
ip-address
: Summary address.
mask
: Summary route mask, in dotted decimal notation.
mask-length
: Length of summary route mask, in the range 0 to 32.
as-set
: Creates a summary with AS set.
attribute-policy
route-policy-name:
Sets the attributes of the summary route according to the routing
policy The routing policy name is a string of 1 to 19 characters.
detail-suppressed
: Only advertises the summary route.
suppress-policy route-policy-name
: Suppresses specific routes defined in the routing policy. The
routing policy name is a string of 1 to 19 characters.
origin-policy
route-policy-name
: References the routing policy to specify routes for summarization.
The routing policy name is a string of 1 to 19 characters.
The keywords of the command are described as follows:
