6-37
group (BGP/BGP-VPN instance view)
Syntax
group group-name
[
external
|
internal
]
undo group
group-name
View
BGP view, BGP-VPN instance view
Default Level
2: System level
Parameters
group-name
: Name of a peer group, a string of 1 to 47 characters.
external
: Creates an EBGP peer group, which can be the group of another sub AS in a confederation.
internal
: Creates an IBGP peer group; not supported in BGP-VPN instance view.
Description
Use the
group
command to create a peer group.
Use the
undo group
command to delete a peer group.
An IBGP peer group is created if neither
internal
nor
external
is specified.
Examples
# In BGP view, create an EBGP peer group
test
with AS number 200, and add EBGP peers 10.1.1.1
and 10.1.2.1 into the group.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] group test external
[Sysname-bgp] peer test as-number 200
[Sysname-bgp] peer 10.1.1.1 group test
[Sysname-bgp] peer 10.1.2.1 group test
# In BGP-VPN instance view, create an EBGP peer group
test
with AS number 200, and add EBGP
peers 10.1.1.1 and 10.1.2.1 into the group (the VPN has been created).
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] group test external
[Sysname-bgp-vpn1] peer test as-number 200
[Sysname-bgp-vpn1] peer 10.1.1.1 group test
[Sysname-bgp-vpn1] peer 10.1.2.1 group test
import-route (BGP/BGP-VPN instance view)
Syntax
import-route
protocol
[ {
process-id
| all-processes
} [
allow-direct
|
med med-value
|
route-policy
route-policy-name
] * ]
undo import-route
protocol
[
process-id | all-processes
]
