1-7
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 127.0.0.1 Interface: InLoopBack0
RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active NoAdv Age: 1d00h41m34s
Tag: 0
Destination: 10.1.2.0/24
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 10.1.2.1 Interface: Vlan-interface2
RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active Adv Age: 1d00h05m42s
Tag: 0
Destination: 10.1.2.1/32
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 127.0.0.1 Interface: InLoopBack0
RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active NoAdv Age: 1d00h05m42s
Tag: 0
Destination: 10.1.3.0/24
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 10.1.3.1 Interface: Vlan-interface1
RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active Adv Age: 1d00h05m31s
Tag: 0
Destination: 10.1.3.1/32
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 127.0.0.1 Interface: InLoopBack0
RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active NoAdv Age: 1d00h05m32s
Tag: 0
For the description of the command output above, see
display ip routing-table ip-address
Syntax
display ip routing-table
ip-address
[
mask-length | mask
] [
longer-match
] [
verbose
]