6-54
[Sysname] bgp 100
[Sysname-bgp] peer test fake-as 200
# In BGP-VPN instance view, configure a fake AS number of 200 for the peer group
test
(the VPN has
been created).
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] peer test fake-as 200
peer filter-policy (BGP/BGP-VPN instance view)
Syntax
peer
{
group-name
|
ip-address
}
filter-policy
acl-number
{
export
|
import
}
undo peer
{
group-name | ip-address
}
filter-policy
[
acl-number
] {
export
|
import
}
View
BGP view, BGP-VPN instance view
Default Level
2: System level
Parameters
group-name
: Name of a peer group, a string of 1 to 47 characters.
ip-address
: IP address of a peer.
acl-number
: ACL number, in the range 2000 to 3999.
export
: Applies the filter-policy to routes advertised to the peer/peer group.
import
: Applies the filter-policy to routes received from the peer/peer group.
Description
Use the
peer filter-policy
command to configure an ACL-based filter policy for a peer or peer group.
Use the
undo peer filter-policy
command to remove the configuration.
By default, no ACL-based filter policy is configured for a peer or peer group.
Related commands:
peer as-path-acl
.
Examples
# In BGP view, apply the ACL 2000 to filter routes advertised to the peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test filter-policy 2000 export
# In BGP-VPN instance view, apply the ACL 2000 to filter routes advertised to the peer group test (the
VPN has been created).
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] peer test filter-policy 2000 export