9-22
Field
Description
CkSum Checksum
# Display the statistics of OSPFv3 link state retransmission list.
<Sysname>display ospfv3 retrans-list statistics
OSPFv3 Router with ID (11.1.1.1) (Process 1)
Interface Neighbor LSA-Count
Vlan1 12.1.1.1 2
Table 9-16
display ospfv3 retrans-list statistics
command output description
Field
Description
Interface Interface
name
Neighbor Neighbor
ID
LSA-Count
Number of LSAs in the retransmission request list
display ospfv3 routing
Syntax
display ospfv3
[
process-id
]
routing
[
ipv6-address prefix-length
| ipv6-address/prefix-length |
abr-routes
|
asbr-routes
|
all | statistics
]
View
Any view
Default Level
1: Monitor level
Parameters
process-id
: Specifies the ID of an OSPFv3 process, ranging from 1 to 65535.
ipv6-address
: IPv6 address prefix.
prefix-length
: Prefix length, in the range 0 to 128.
abr-routes
: Displays routes to ABR.
asbr-routes
: Displays routes to ASBR.
all
: Displays all routes.
statistics
: Displays the OSPFv3 routing table statistics .
Description
Use the
display ospfv3 routing
command to display OSPFv3 routing table information.
If no process is specified, routing table information of all OSPFv3 processes is displayed.
Examples
# Display OSPFv3 routing table information.
<Sysname> display ospfv3 routing