10-11
ipv6 maximum load-balancing
Syntax
ipv6 maximum load-balancing number
undo ipv6 maximum load-balancing
View
IS-IS view
Default Level
2: System level
Parameters
number
: Maximum number of equal-cost routes for load balancing. The number ranges from 1
to 4.
Description
Use the
ipv6 maximum load
-
balancing
command to configure the maximum number of
equal-cost routes for load balancing.
Use the
undo ipv6 maximum load-balancing
command to restore the default.
By default, the maximum number of equal cost routes for load balancing is 4.
Configure the maximum number of equal-cost routes for load balancing according to the
memory capacity.
Examples
# Configure the maximum number of equal-cost routes for load balancing as 2.
<Sysname> system-view
[Sysname] isis 100
[Sysname-isis-100] ipv6 maximum load-balancing 2
ipv6 preference
Syntax
ipv6 preference
{
preference
|
route-policy route-policy-name
} *
undo ipv6 preference
View
IS-IS view
Default Level
2: System level
Parameters
preference
: Preference for IPv6 IS-IS, ranging from 1 to 255.