1-20
Age : 22161sec
Table 1-6 display ipv6 routing-table verbose
command output description
Field
Description
Destination
Destination IPv6 address
PrefixLength
Prefix length of the address
Nexthop Next
hop
Preference Route
preference
RelayNextHop
Recursive next hop
Tag
Tag of the route
Neighbour Neighbor
address
ProcessID Process
ID
Interface Outbound interface
Protocol Routing
protocol
State
State of the route, Active, Inactive, Adv (advertised), or NoAdv (not
advertised)
Cost
Cost of the route
Tunnel ID
Tunnel ID
Label Label
Age
Time that has elapsed since the route was generated
display router id
Syntax
display router id
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the
display router id
command to display the router ID.