12
Table 1 information:
Table type: Extensibility, flow entry count: 2, total flow entry count: 2
MissRule (default) Flow entry information:
cookie: 0x0, priority: 0, hard time: 0, idle time: 0, flags: none,
byte count: --, packet count: 60
Match information: any
Instruction information:
Write actions:
Drop
Flow entry 1 information:
cookie: 0x0, priority: 0, hard time: 0, idle time: 0, flags: flow_send_rem
|check_overlap, byte count: --, packet count: 1
Controller ID: 13
Match information:
Input interface: XGE1/0/3
Ethernet source MAC address: 0000-0000-0001
Ethernet source MAC address mask: ffff-ffff-ffff
Instruction information:
Set meter: 100
Apply actions:
Output interface: XGE1/0/4
Write actions:
Output interface: Controller, send length: 128 bytes
Table 3 Command output
Field
Description
Table information
Information about the flow table.
Table type
Type of the flow table:
MAC-IP
or
Extensibility
.
flow entry count
Number of flow entries deployed by the controller.
total flow entry count
Total number of flow entries in the table.
Flow entry information
Information about the flow entry. If the flow entry does not take effect, this field
displays
Not effective
.
cookie
Cookie ID of the flow entry.
priority
Priority of the flow entry. The larger the value, the higher the priority.
hard time
Hard timeout of the flow entry, in seconds. The flow entry is removed when the
timer times out, whether or not the flow entry matches any data stream.
If the flow entry has no hard timeout, the field displays
0
.
idle time
Idle timeout of the flow entry, in seconds. The flow entry is removed if the flow
entry does not match any data stream during the idle time.
If the flow entry has no idle timeout, the field displays
0
.
flags
Flags that the flow entry includes:
•
flow_send_rem
—Sends a flow removed message when the flow entry is
removed or expires.
•
check_overlap
—Checks for overlapping flow entries.
•
reset_counts
—Resets flow table counters.
