Command Manual – PoE
H3C S7500 Series Ethernet Switches
Chapter 1 PoE Configuration Commands
1-10
[H3C] poe enable slot 2
[H3C] poe legacy enable slot 2
1.1.8 poe max-power
Syntax
poe max
-
power max-power
undo poe max
-
power
View
Ethernet port view
Parameters
max-power
: Maximum power distributed to the port, ranging from 1,000 to 15,400 in
mW.
Description
Use the
poe max-power
command to configure the maximum power supplied by the
current port.
Use the
undo poe max-power
command to restore the maximum power supplied by
the current port to the default value.
By default, the maximum power that a port can supply is 15,400 mW.
Examples
# Set the maximum power supplied by Ethernet 3/0/1 to 12,000 mW.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] interface Ethernet 3/0/1
[H3C-Ethernet3/0/1] poe max-power 12000
1.1.9 poe max-power slot
Syntax
poe max-power max-power slot slot-number
undo poe max-power slot slot-number
View
System view
Parameters
max-power
: Maximum power distributed to the board, ranging from 37 to 806, in W.
