Command Manual – PoE
H3C S7500 Series Ethernet Switches
Chapter 1 PoE Configuration Commands
1-7
Description
Use the
display poe pse
command to display the parameters of all boards that serve
as power sourcing equipment (PSE).
Examples
# Display the parameters of all boards that serve as PSE on the switch.
<H3C> display poe pse
PSE Information of board 4:
Power Current Value :450 W
Power Max Value :806 W
Power Peak Value :700 W
Power Average Value :475 W
Software Version :290
Hardware Version :000
CPLD Version :000
Table 1-3
Description on the fields of the
display poe pse
command
Field
Description
Power Current Value
Current power of the board
Power Max Value
Maximum power of the board
Power Peak Value
Peak power of the board
Power Average Value
Average power of the board
Software Version
Version of the PSE software
Hardware Version
Version of the PSE hardware
CPLD Version
Version of the PSE complex
programmable logic device (CPLD)
1.1.5 poe enable
Syntax
poe enable
undo poe enable
View
Ethernet port view
Parameters
None
