2
Table 1
Console cable pinouts
RJ-45 pin
Signal
DB-9 pin
Signal
1 RTS
8 CTS
2 DTR
6 DSR
3 TXD
2 RXD
4 CD
5 SG
5 GND
5 SG
6 RXD
3 TXD
7 DSR
4 DTR
8 CTS
7 RTS
Figure 2
Connecting the switch and the PC through the console port
To connect the console cable:
1.
Connect the DB-9 connector of the console cable to the serial port of a PC or terminal.
2.
Connect the RJ-45 connector of the console cable to the console port of the MPU of the switch.
NOTE:
When you remove the console cable, first unplug the RJ-45 end, and then the DB-9 end.
Setting up a configuration environment
1.
Select
Start
>
All Programs
>
Accessories
>
Communications
>
HyperTerminal
.
The
Connection Description
dialog box appears.
2.
Enter the name of the new connection in the
Name
field and click
OK
.
Summary of Contents for S9500E Series
Page 13: ...12 Figure 12 Installing FMTs...