2-8
NOTE:
If a rack shelf is available, you can put the switch on the rack shelf and slide the switch to a position
so that the mounting brackets make close contact with the front rack posts. Then use screws to
secure the mounting brackets to the rack.
Rack requirements
To mount the switch in a 19-inch rack, the rack must meet the requirements in
Figure2-3 S9820-8C/S9820-8C-SAN chassis dimensions
(1) Fan module handle
(2) Interface module ejector lever
Table2-2 Rack requirements
Switch model
Chassis dimensions
Distance
between the
front and rear
rack posts
Rack requirements
S9820-8C
S9820-8C-SAN
•
Height
—130.5 mm (5.14 in)/3
RU
•
Width
—440 mm (17.32 in)
•
Depth
—837 mm (32.95 in)
760 mm (29.92 in) for the
chassis
27 mm (1.06 in) for the
interface module ejector
levers
50 mm (1.97 in) for the fan
module handles
630 to 900 mm
(24.80 to 35.43 in)
•
A minimum of 1200
mm (47.24 in) in
depth
(recommended)
•
A minimum of 150
mm (5.91 in)
between the front
rack post and the
front door.
•
A minimum of 840
mm (33.07 in)
between the front
rack post and the
rear door.
IMPORTANT:
To reserve enough cabling space and close the rack door easily, make sure the rack meets the
depth requirements.
Installation accessories
Table2-3 Installation accessories for rack-mounting the switch
Item
Quantity and requirements
Mounting bracket (provided)
1 kit. See
. The mounting bracket with a round hole in the
narrow flange supports hanging a fixed asset tag.
760 mm
(29.92 in)
130.5 mm (5.14 in)
1
2
27 mm (1.06 in)
50 mm (1.97 in)
Summary of Contents for S9820-8C-SAN
Page 37: ...3 30...
