2-12
Figure2-10 Installing bottom support rails
Mounting the switch in the rack
This task requires two people.
To mount the switch in the rack:
1.
Verify that the mounting brackets have been securely attached to the switch chassis.
2.
Verify that the bottom support rails and cage nuts have been correctly attached to the rack
posts.
3.
One person performs the following operations:
a.
Supporting the bottom of the switch, aligns the chassis with the bottom support rails.
b.
Pushes the switch slowly into the rack so that the mounting brackets are flush against the
rack posts.
4.
Another person uses screws of appropriate size to attach the mounting brackets to the rack.
You need to prepare these screws yourself. Make sure the screws are anti-corrosive.
1
2
Attach bottom support rails
to the rack
Attach cage nuts
to the rack
Summary of Contents for S9820-8C-SAN
Page 37: ...3 30...
