2-7
Installing the switch in a 19-inch rack
Rack-mounting procedure at a glance
Figure2-2 Rack-mounting procedure
NOTE:
If a rack shelf is available, you can put the switch on the rack shelf and slide the switch to a position
so that the mounting brackets are flush against the front rack posts. Then use screws to secure the
mounting brackets to the rack.
Chassis dimensions
S9825-64D switches with the LS-9825-64D and LS-9825-64D-H1 product codes have the same
chassis dimensions.
shows the dimensions of an S9825-64D switch with the LS-9825-64D
product code that has mounting brackets installed.
Figure2-3 Dimensions of an S9825-64D switch with the LS-9825-64D product code that has
mounting brackets installed
(1) Fan tray handle
(2) Mounting bracket
and
shows the dimensions of the S9855-48CD8D/S9855-24B8D switch.
Attach the
mounting
brackets to the
switch
(Optional.) Attach
the chassis rails
to the switch
Connect the
grounding cable
to the switch
Select an installation position
for the mounting brackets
(near the port side or power
supply side)
Mount the
switch in the
rack
Attach the slide
rails or bottom
support rails to
the rack
