Installation Manual
H3C SecPath F1000-E Firewall
Chapter 6 Maintaining Software
6-27
z
You can use the
ping
command to check whether the connection is successful.
Caution:
You can upgrade the applications of the F1000-E through GigabitEthernet 0/0 only.
2)
Enable the FTP service.
# Enable FTP server.
[H3C] ftp server enable
# Add FTP username and password.
[H3C] local-user guest
[H3C-luser- guest] service-type ftp
[H3C-luser- guest] password simple 123456
[H3C-luser-guest] level 3
Table 6-11
Description on the display information of enabling the FTP service
Display information
Description
ftp server enable
Enable the FTP server function.
local-user guest
Create a local user, and enter user view.
service-type ftp
Set the service type that can be used
locally to
FTP
.
password simple 123456
Configure the user password.
level 3
Set the user level to 3.
Note:
z
The FTP service is enabled after the authentication and authorization of the FTP
server are configured. The FTP server supports multi-client access. A remote FTP
client sends a request to the FTP server. The FTP server executes an action
accordingly and returns the execution result to the client.
z
After you configure the FTP server authentication and authorization, you need to set
the user level to 3. Otherwise, the system prompts that “You have no rights to store
files” when you restore the backed-up file to the firewall. For configurations of user
levels, refer to
H3C SecPath Series Security Products User Manual
.
3)
Enable the FTP client program on the PC.
