Installation Manual
H3C SecPath F1000-E Firewall
Chapter 6 Maintaining Software
6-34
System start booting...
Booting Normal Extend BootWare....
3)
Set a new password in system view after system reboot.
<H3C> system-view
[H3C] user-interface console 0
[H3C-ui-console0] authentication-mode password
[H3C-ui-console0] set authentication password simple 123456
The above information indicates that the password authentication is adopted on the
console interface and the password is set to
123456
and stored in plain text.
Note:
z
After reboot, the system runs with the initial default configuration, but the original
configuration file is still stored in the storage medium. To restore the original
configuration, you can use the
display saved-configuration
command to display
the configuration, and then copy and execute the configuration.
z
If the password is stored in plain text, you can use the
display
current-configuration
command to view the password in the current configuration.
If the password
123456
is set with the
set authentication password cipher
command, the password is stored in cipher text.
4)
Save the new password.
[H3C] save
Note:
z
Execute the
save
command after modifying the user password to save the new
password.
z
You are recommended to save the modification to the configuration file used by
default.
6.7.2 BootWare Password Loss
Contact the agent or the technical support personnel to set a new password in the
event of BootWare password loss.
The BootWare password is modified on the BootWare main menu. Select
5
on the
BootWare main menu to modify the password.
The console terminal displays:
