Installation Manual
H3C SecPath F1000-E Firewall
Chapter 6 Maintaining Software
6-36
Clear Application Password Success
Note:
z
Select option
8
, quit the menu, reboot the firewall, and then you can enter system
view directly.
z
This setting (password clearing) is valid only for the first reboot of the firewall. The
super password will be restored after a second reboot.
6.8 Backing Up and Restoring BootWare
Select
7
on the BootWare main menu to enter the BootWare operation submenu. Refer
to section 6.2.5 “BootWare Operation Submenu” on page 6-9 for details.
6.8.1 Backing Up the Full BootWare
I. Backing up the full BootWare using BootWare menu options
To backup a full BootWare, you need to backup the basic segment and then the
extended segment.
Select
1
on the BootWare operation submenu, and the system prompts:
Will you backup the Basic BootWare? [Y/N]
Select
Y
:
Begin to backup the Basic BootWare....................
Done!
At this moment, backup for the basic segment is finished.
The system continues to prompt:
Will you backup the Extend BootWare? [Y/N]
Select
Y
:
Begin to backup the Extend BootWare....................
Done!
At this moment, backup for the extended segment is finished.
Note:
Both the basic and extended BootWare are backed up to the Flash.
