Installation Manual
H3C SecPath F1000-E Firewall
Chapter 7 Maintaining Hardware
7-11
7.8.3 Memory Module and Connector Structure
Figure 7-14
Structure of a memory module for the F1000-E
Figure 7-15
Structure of a memory module connector
7.8.4 Removing a Memory Module
1)
Make sure all power supplies to the firewall are disconnected.
2)
Pull the latches away from the memory module at both ends so that the memory
module is lifted from the connector.
3)
Remove the memory module by holding its non-conductive edge.
Figure 7-16
Remove the memory module
