Installation Manual
H3C SecPath F1000-E Firewall
Chapter 6 Maintaining Software
6-15
6.3.4 Upgrading BootWare
Enter the BootWare main menu, refer to section 6.2.1 “BootWare Main Menu“ on page
7
to enter the BootWare operation submenu, where you can perform all
BootWare operations. For detailed description on this submenu, refer to section 6.2.5
“BootWare Operation Submenu“ on page 6-9.
The following example shows how to upgrade the full BootWare:
First modify the baud rate to improve the upgrading speed (refer to section 6.3.2
“Modifying Serial Interface Parameters“ on page 6-11), and then select
3
on the
BootWare operation submenu. The system prompts:
===========<BOOTWARE OPERATION SERIAL SUB-MENU>==============
| <1> Update Full BootWare |
| <2> Update Extended BootWare |
| <3> Update Basic BootWare |
| <4> Modify Serial Interface Parameter |
| <0> Exit To Main Menu |
=============================================================
Enter your choice(0-4):
Select
1
, the system displays the following:
Waiting ...CCCCCCCCCCCCCCCCCCCCCCCCC...
Select
Transfer
>
Send file…
in the terminal window. The following dialog box
appears:
Figure 6-7
Send File dialog box
Click
Browse…
to select the application file to be downloaded, and select
Xmodem
from the
Protocol
drop-down list. Then click
Send
and the following dialog box
appears:
