48
Item Specification
Interface speed and duplex mode
10 Mbps, half/full-duplex
100 Mbps, half/full-duplex
1000 Mbps, full-duplex
NOTE:
The Ethernet ports on network adapters are typically media dependent interface (MDI) ports. The
ports on hubs or LAN switches are typically MDIX ports.
GE fiber Ethernet port
The device provides twelve 1000BASE-X fiber Ethernet ports.
Table 22 Fiber Ethernet port specifications
Item Specification
Connector type
LC
Transceiver module type
SFP transceiver module. See
for the available SFP transceiver
modules.
Standard compliance
1000BASE-X
Interface speed
1000 Mbps
Duplex mode
Full duplex
Table 23 1000BASE-X SFP transceiver modules available for the 1000BASE-X fiber ports
Transceiver module
Central
wavelength
Connect
or
Fiber
Max transmission
distance
SFP-GE-SX-MM850-A 850
nm
LC
62.5/125 µm, MMF
0.55 km (1804.46 ft)
SFP-GE-LX-SM1310-A
1310 nm
LC
9/125 µm, SMF
10 km (6.21 miles)
SFP-GE-LH40-SM1310
1310 nm
LC
9/125 µm, SMF
40 km (24.86 miles)
SFP-GE-LH40-SM1550
1550 nm
LC
9/125 µm, SMF
40 km (24.86 miles)
SFP-GE-LH80-SM1550
1550 nm
LC
9/125 µm, SMF
80 km (49.71 miles)
SFP-GE-LH100-SM1550 1550 nm
LC
9/125 µm, SMF
100 km (62.14 miles)
10GE fiber Ethernet port
The device provides four 10GBASE-R SFP+ fiber Ethernet ports. These SFP+ ports cannot operate
in 1000 Mbps.
Table 24 10GE fiber port specifications
Item Specification
Connector type
LC
Transceiver module type
for the available SFP+ transceiver
modules.
