5-30
5
Hardware management and
maintenance
NOTE:
The output depends on your firewall model. For more information about the commands used in this
chapter, see the corresponding configuration guides and command references.
Displaying detailed information about the firewall
Use the
display device verbose
command to display detailed information, including the
running status and hardware version, about the firewall and its interface modules.
<Sysname> display device verbose
Slot 1 SubSlot 0 info:
Status : Normal
Type : RPU
PCB 1 Ver : VER.B
Software Ver : 9606P03
CPU Ver : 1.0
CPLD_A : 1.0
CPLD_B : 1.0
CFCard Num : 0
Displaying the software and hardware version
information for the firewall
Use the
display version
command to display software and hardware version information for the
firewall.
<Sysname> display version
H3C Comware Software, Version 7.1.064, Alpha 9606P03
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd. All rights reserved.
H3C SecPath F5060 uptime is 0 weeks, 0 days, 0 hours, 31 minutes
Boot image: sda0:/Main-CMW710-BOOT-A9606P03.bin
Boot image version: 7.1.064, Alpha 9606P03
Compiled Apr 27 2017 16:00:00
System image: sda0:/Main-CMW710-SYSTEM-A9606P03.bin
System image version: 7.1.064, Alpha 9606P03
Compiled Apr 27 2017 16:00:00
SLOT 1
CPU type: Multi-core CPU
DDR3 SDRAM Memory: 32752M bytes
SD0: 3728M bytes