55
Switching fabric module model
Applicable gateways
NSQ1FAB08D0
M9010
M9010-GM
NSQ1FAB12D0 M9014
Power modules
The gateway supports power modules of models NSQM1AC2500 and NSQM1DC2400. An
NSQM1AC2500 power module is an AC-input, DC-output power module that provides a maximum
DC output power of 2500 W. An NSQM1DC2400 power module is a DC-input, DC-output power
module that provides a maximum DC output power of 2400 W.
Table 28 NSQM1AC2500 and NSQM1DC2400 power module specifications
Item NSQM1AC2500 NSQM1DC2400
Rated input voltage
range
100 VAC to 240 VAC @ 50/60 Hz
–48 VDC to –60 VDC
Rated output voltage
12 VDC
12 VDC
Maximum input current
16 A
60 A
Maximum output current
•
100 A (110 VAC)
•
208A (220 VAC)
200 A
Maximum output power
•
1200 W (110 VAC)
•
2500 W (220 VAC)
2400 W
Temperature
requirements
Operating temperature: –10°C to
+50°C (14°F to 122°F)
Operating temperature: –10°C to
+50°C (14°F to 122°F)
Storage temperature: –40°C to +85°C
(–40°F to +185°F)
Storage temperature: –40°C to +85°C
(–40°F to +185°F)
You can select a certain number of power modules according to the actual power consumption
requirements. Make sure that the total maximum output power of the ordered power modules is
greater than the system power consumption. As a best practice, reserve 20% of the maximum output
power.
NOTE:
•
Power modules of different models cannot be installed on the same gateway.
•
When the temperature of a power module exceeds the normal operating temperature, the power
module is automatically powered off. When the temperature recovers to the normal temperature,
the power module is automatically powered on.
Fan trays
shows the fan trays that each M9000 gateway supports. Every M9000 gateway comes with
fan trays installed.
