10
Figure 4 Locating the cage nut installation positions on the rack post
(1) Middle of the narrower metal area between holes
3.
Install six cage nuts in the square holes on each rack post, as shown in
Figure 5 Installing a cage nut
4.
Align the installation holes on the front end of the slide rail with the cage nuts on the front rack
post, and attach them with screws, as shown in
.
Figure 6 Attaching the slide rail to the rack
5.
Keep the slide rail horizontally and adjust its length until the installation holes on the rear end of
the slide rail touch the cage nuts on the rear rack post. Then fasten a screw in each installation
hole.
Install a screw in each mounting hole of the slide rail to ensure its weight bearing capacity.
