Installation Manual
H3C SecPath V100-S Security Gateway
Chapter 3 Installing the SecPath V100-S
3-2
Caution:
Before you install the SecPath V100-S, make sure that you have read Chapter 2
“Installation Preparations” carefully and have satisfied all the requirements.
3.2 Mounting the SecPath V100-S
You can mount your device on a workbench or in a standard 19-inch rack.
3.2.1 Free-Standing
Place the security gateway on a clean and flat workbench. To prevent any damage,
observe the following:
z
Ensure the workbench is stable enough.
z
Allow 10 cm (3.9 inches) of clearance around the ventilation openings.
z
Do not place any heavy object on the device.
3.2.2 Rack Mounting
The SecPath V100-S is designed to be mounted in 19-inch standard racks. The
following table shows its physical dimensions.
Table 3-1
Dimensions of the SecPath V100-S
Model
Dimensions
SecPath V100-S (H
×
W
×
D)
42 x 300
×
220 mm (1.7 x 11.8
×
8.7 in.)
(excluding rubber feet)
Follow these steps to install the SecPath V100-S:
Step 1: Ensure that the rack is stable enough and properly grounded. Attach the
rack-mounting ears to the front of the chassis with screws.
Step 2: Place the SecPath V100-S on a shelf in the rack and slide it to a proper position
along the guide rails.
Step 3: Fix the rack-mounting ears to the rack posts with suitable antirust pan-head
screws. Make sure that the device is placed horizontally and securely fixed.