Installation Manual
H3C SecPath V100-S Security Gateway
Chapter 5 Software Maintenance
5-11
After the above operation, the FTP server is enabled on the security gateway, and a
user is set. Then, any FTP client program can access FTP server using this user name
and its password.
III. Uploading/downloading application, configuration files and uploading Boot
ROM program
Step 1: Enter the path of the files or applications in DOS window, perform FTP
command, and create the FTP connection to the security gateway, for example:
C:\version\ftp 10.110.10.10
If the connection is made, the system displays the following message (taking
Windows98 as an example):
Connected to 10.110.10.10
220 FTP server ready on SecPathGateway at
User(10.110.10.10:(none)):
Step 2: Access FTP server using the configured user name and password.
User(10.110.10.10:(none)): SecPath Gateway
Enter the user name
331 Password required for ftp
Password:
Enter the password and it will not be displayed
on the screen
230 User ftp logged in
ftp>
At the prompt of ftp>, you can upload or download files.
Step 3: Upload/download applications, configuration files, or upload Boot ROM
programs.
Note:
By default, the application name of the security gateway side is system, the filename is
config.cfg, Boot ROM filename extension is bootrom, and the whole Boot ROM
filename is bootromfull.
z
Upload application, Boot ROM program, or configuration files.
ftp> put
Enter “put” to upload files.
local file
Input the application, Boot ROM program, or filename name
to be uploaded
remote file
Input the name of the files to be saved after upload.
