Installation Manual
H3C SecPath V1000-A Security Gateway
Chapter 5 Software Maintenance
5-11
After the FTP server is enabled and the user is added onto the security gateway, any
FTP client program can use the username and password to log onto the FTP server.
III. Uploading/Downloading an application program/configuration file and
uploading the Boot ROM program
Step 1: In the DOS environment, access the directory containing the application
program/Boot ROM/configuration file. Execute the
ftp
command to set up an FTP
connection with the security gateway, for example:
C:\version\ftp 10.110.10.10
If the connection is set up, the following message appears (taking Windows98 for
example):
Connected to 10.110.10.10
220 FTP server ready on VPNGateway at
User(10.110.10.10:(none)):
Step 2: Log onto the FTP server using the username and password set on the security
gateway.
User(10.110.10.10:(none)):
VPNGateway
331 Password required for ftp
Password:
230 User ftp logged in
ftp>
Appearance of the prompt “ftp>” indicates that you can begin uploading/downloading
the desired file.
Step 3: Upload/Download the application program/configuration file/Boot ROM.
Note:
On the security gateway, the default name of the application program is "system”, the
configuration file “config.cfg”, the extended segment of the Boot ROM “bootrom”, and
the entire Boot ROM “bootromfull”.
z
Upload the application program/Boot ROM/configuration file
ftp> put
=>Type put, meaning to upload
local
file
=>Type the name of the application program/Boot
ROM/configure file to be uploaded.
remote
file
=>Type the name of the application program/Boot
ROM/configure file to be save in the security gateway.