3-32
After the configuration, when you log in to the device through the console port at the next time, you are
prompted to press enter. A prompt such as <H3C> appears after you press
Enter
, as shown in
Figure 3-6
Configuration page
Configuring Password Authentication for Console Login
Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For how to log in to the device with default configuration, see
.
Configuration procedure
Follow these steps to configure password authentication for console login:
To do…
Use the command…
Remarks
Enters system view
system-view
—
Enter console user interface view
user-interface console
first
-
number
[
last-number
]
—
Configure the authentication mode
as local password authentication
authentication-mode password
Required
By default, you can log in to the
device through the console port
without authentication and have
user privilege level 3 after login.
Set the local password
set authentication password
{
cipher
|
simple
}
password
Required
By default, no local password is
set.
Configure common settings for
console login
—
Optional
See
.
Summary of Contents for SR6600 SPE-FWM
Page 112: ...6 101...
