3-53
Configuring Password Authentication for AUX Login
Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For how to log in to the device with default configuration, see
.
Configuration procedure
Follow these steps to configure password authentication for AUX login:
To do…
Use the command…
Remarks
Enters system view
system-view
—
Enter one or more AUX user
interface views
user-interface aux first
-
number
[
last-number
]
—
Specify the password
authentication mode
authentication-mode password
Required
By default, you can log in to the
device through the AUX port with
password authentication and have
user privilege level 0 after login.
Set the local password
set authentication password
{
cipher
|
simple
}
password
Required
By default, no local password is
set.
Configure common settings for
AUX login
—
Optional
See
After the configuration, when you log in to the device through the AUX port at the next time, you are
prompted to enter a login password. A prompt such as <H3C> appears after you input the password
and press
Enter
, as shown in
Figure 3-18
Configuration page
Summary of Contents for SR6600 SPE-FWM
Page 112: ...6 101...
