3-66
Figure 3-29
Configuration page
Step4
Execute commands to configure the device or check the running status of the device. To get help,
type
?
.
z
To terminate the connection between the PC and device, execute the
ATH
command on the
terminal to terminate the connection between the PC and modem. If you cannot execute the
command on the terminal, input AT+ + + and then press
Enter
. When you are prompted
OK
,
execute the
ATH
command, and the connection is terminated if
OK
is displayed. You can also
terminal the connection between the PC and deice by clicking
on the hyper terminal window.
z
Do not close the hyper terminal directly. Otherwise, the remote modem may be always online, and
you will fail to dial in at the next time.
Modem Login Authentication Modes
Three authentication modes are available for modem dial-in login:
none
,
password
, and
scheme
.
z
none
: Requires no username and password at the next login through modems. This mode is
insecure.
z
password
: Requires password authentication at the next login through the console port. Keep
your password. If you lose your password, log in to the device through the console port to view or
modify the password.
z
scheme
: Requires username and password authentication at the next login through the console
port. Authentication falls into local authentication and remote authentication. To use local
authentication, configure a local user and related parameters. To use remote authentication,
configure the username and password on the remote authentication server. For more information
about authentication modes and parameters, see
AAA Configuration
in the
Security Volume
.
Keep your username and password.
Summary of Contents for SR6600 SPE-FWM
Page 112: ...6 101...
