3-68
To do…
Use the command…
Remarks
Configure common settings for
VTY user interfaces
—
Optional
See
for VTY User Interfaces (Optional)
After the configuration, when you log in to the device through modems, you are prompted to press
Enter
. A prompt such as <H3C> appears after you press
Enter
, as shown in
Figure 3-30
Configuration page
Configuring Password Authentication for Modem Login
Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For how to log in to the device with default configuration, see
.
Configuration procedure
Follow these steps to configure password authentication for modem login:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter one or more AUX user
interface views
user-interface aux first
-
number
[
last-number
]
—
Specify the password
authentication mode
authentication-mode password
Required
By default, the modem login
authentication mode of the device
is password.
Set the local password
set authentication password
{
cipher
|
simple
}
password
Required
By default, no local password is
set.
Summary of Contents for SR6600 SPE-FWM
Page 112: ...6 101...
