3-3
FIP module LEDs
Figure 3-2 FIP module LEDs
(1) 10GBASE-R-SFP+ Ethernet fiber port LEDs 0 through 3
(2) 1000BASE-X-SFP Ethernet fiber port LEDs 4 through 19
(3) Remove button/LED
Table 3-2 FIP module LED descriptions
LED
Status
Description
10GBASE-R-SFP+ 0 to 3
Steady green
A 10 Gbps link is present on the port.
Flashing green (3 Hz)
The port is sending or receiving data at 10 Gbps.
Steady yellow
A 1000 Mbps link is present on the port.
Flashing yellow (3 Hz)
The port is sending or receiving data at 1000 Mbps.
Off
No link is present on the port.
1000BASE-X-SFP 4 to
19
Steady green
A 1000 Mbps link is present on the port.
Flashing green (3 Hz)
The port is sending or receiving data at 1000 Mbps.
Steady yellow
A 100 Mbps link is present on the port.
Flashing yellow (3 Hz)
The port is sending or receiving data at 100 Mbps.
Off
No link is present on the port.
Remove button/LED
Steady green
The FIP module is operating correctly and the
MIC-X interface module can be hot swapped.
Flashing green (8 Hz)
The FIP module or MIC-X interface module is being
initialized and the MIC-X interface module cannot
be hot swapped.
Off
You can remove the FIP module.
