13-2
Configuration terminal display issue
No display
Symptom
The configuration terminal does not have display when the device is powered on.
Solution
To resolve the issue:
1.
Verify that the power system is operating correctly.
2.
Verify that the console cable is correctly connected.
3.
Verify that the console cable does not have any issues and the terminal settings are correct.
4.
If the issue persists, contact H3C Support.
Garbled display
Symptom
The display on the configuration terminal is garbled.
Solution
To resolve the issue:
1.
Verify that the terminal parameters are configured as follows:
Baud rate
—9,600.
Data bits
—8.
Stop bits
—1.
Parity
—None.
Flow control
—None.
2.
If the issue persists, contact H3C Support.
