manualshive.com logo in svg

H3C UniServer B5700 G3, User Manual

The H3C UniServer B5700 G3 is a powerful server designed for high-performance computing. Ensure optimal usage by downloading the free User Manual from our website. This comprehensive manual will guide you through setup, troubleshooting, and maintenance, ensuring seamless operation of your server. Download it now for free from 88.208.23.73:8080.

Share
Download
background image

1 

Storage controller features 

The available features vary by storage controller  model. For more information, see 

H3C  Servers 

Storage Controllers Technical Specifications

. 

Hot spare drives 

About hot spare drives 

You can configure hot spare drives to improve data security. One or multiple independent drives in 
the drive system can function as hot spare drives. When a drive in a redundant RAID fails, a spare 
drive automatically replaces the failed drive and rebuilds the data of the failed drive, enhancing the 
fault tolerance of the system. 

From the management interface or CLI of a storage controller, you can specify a hot spare drive for 
the RAID. Make sure the following conditions are met: 

•

 

The hot spare drive is idle and of the same media type as a RAID member drive. 

•

 

The capacity of the hot spare drive is equal to or larger than a RAID member drive. 

Hot spare drives include the following types: 

•

 

Global Spare

—Specifies a hot spare drive for all the redundant RAIDs. You can specify one or 

multiple global spare drives. A global spare drive can replace any failed drive in any redundant 
RAID. When the storage controller detects that a new drive replaces the failed drive, states of 
the spare and new drives vary by support of the storage controller for data copyback: 

 

If the storage controller supports copying data on the global spare drive back to the new 
drive, the new drive becomes a RAID member drive and the global spare drive is placed in 
standby status. 

 

If the storage controller does not support copying data on the global spare drive back to the 
new drive, the global spare drive becomes a RAID member drive and the new drive is idle. 
You can configure the new drive as a hot spare drive from the management interface or 
CLI. 

•

 

Dedicated Spare

—Specifies a hot spare drive for a specific redundant RAID. You can specify 

one or multiple dedicated spare drives for a redundant RAID. A dedicated spare drive can 
replace a failed drive in the specific RAID. When the storage controller detects that a new drive 
replaces the failed drive, states of the spare and new drives vary by the support of the storage 
controller for data copyback: 

 

If the storage controller supports copying data on the dedicated spare drive back to the 
new drive, the new drive becomes a RAID member drive and the dedicated spare drive is 
placed in standby status. 

 

If the storage controller does not support copying data on the dedicated spare drive back to 
the new drive, the dedicated spare drive becomes a RAID member drive and the new drive 
is idle. You can configure the new drive as a hot spare drive from the management 
interface or CLI. 

•

 

Auto Replace

—Specifies a hot spare drive for a specific redundant RAID. Only P460 and 

H460 storage controllers support auto replace spare drives. You can specify one or multiple 
auto replace spare drives for a redundant RAID. An auto replace spare drive can replace a 
failed drive in the specific RAID. When the storage controller detects that a new drive replaces 
the failed drive, it will not copy data on the auto replace spare drive back to the new drive and 
place the new drive in standby status. 

•

 

Pooled Spare

—Specifies a hot spare drive for a RAID array set. You can specify one or 

multiple pooled spare drives for a RAID array set. A pooled spare drive can replace a failed 
drive in the RAID set. When the storage controller detects that a new drive replaces the failed 

Summary of Contents for UniServer B5700 G3


















































































































































































































































































































































































































Reviews:

No comments

Related manuals for UniServer B5700 G3

Harman AMX Vision2 V2-MASTER-1210 Quick Start Manual preview
AMX Vision2 V2-MASTER-1210
Brand: Harman Pages: 2
Santec SVS-3001 User Manual preview
SVS-3001
Brand: Santec Pages: 40
Omneon MediaGrid ContentServer 3000 Quick Reference Manual preview
MediaGrid ContentServer 3000
Brand: Omneon Pages: 2
Synology RX410 User Manual preview
RX410
Brand: Synology Pages: 24
Fusion FusionServer 2298 V5 Manual preview
FusionServer 2298 V5
Brand: Fusion Pages: 89
Supero SUPERSERVER 7045W-NTR+ User Manual preview
SUPERSERVER 7045W-NTR+
Brand: Supero Pages: 146
Bodet NETSILON 11 Installation Manual preview
NETSILON 11
Brand: Bodet Pages: 13
Cisco UCS Invicta C3124SA Manual preview
UCS Invicta C3124SA
Brand: Cisco Pages: 60
Cisco UCS X9508 Installation Notes preview
UCS X9508
Brand: Cisco Pages: 54
Cisco UCS Invicta C3124SA Installation Manual preview
UCS Invicta C3124SA
Brand: Cisco Pages: 40
Cisco UCS X9508 Installation Manual preview
UCS X9508
Brand: Cisco Pages: 132
Cisco UCS E Series Installation Manual preview
UCS E Series
Brand: Cisco Pages: 46
Cisco UCS S3260 M5 Design Manual preview
UCS S3260 M5
Brand: Cisco Pages: 35
Cisco Unity Installation Manual preview
Unity
Brand: Cisco Pages: 188
Advantech ASMB-977 Startup Manual preview
ASMB-977
Brand: Advantech Pages: 3
Planet FPS-1101 User Manual preview
FPS-1101
Brand: Planet Pages: 83
Tibbo TCP001 Manual preview
TCP001
Brand: Tibbo Pages: 12
Axis AXIS 570 User Manual preview
AXIS 570
Brand: Axis Pages: 316

Brands by name

Popular brands

Load more brands