16
Figure 23 Creating a container
Table 6 Configuration parameters
Parameter
Description
/dev/md/imsm0
Container name.
/dev/nvme[1-4]n1
NVMe drives to be used for creating the container.
n
Number of NVMe drives.
-e imsm
Specify the keyword to enable support of the Intel®Matrix Storage Manager
(IMSM) metadata format.
2.
Execute the
mdadm -C /dev/md0 /dev/md/imsm0 -n 4 -l 5 -z 10G
command to
create a container, as shown in
Figure 24 Creating a RAID array
Table 7 Configuration parameters
Parameter
Description
/dev/md0
RAID array name.
/dev/md/imsm0
Container name.
n
Number of NVMe drives in the RAID array.
l
RAID level.
z
RAID capacity.
3.
Execute the
mdadm –D /dev/md0
command to view RAID information, including container
name, RAID level, strip size, number of NVMe drives, and RAID status, as shown in
Summary of Contents for UniServer B5700 G3
