2-12
Figure 2-9 Numbering of slots for the full-width single-height blade server
As shown in
, if the front of the chassis is configured with full-width single-height blade
servers supporting up to six Mezz NICs, every two external interfaces of the straight-through
module correspond to a full-width single-height blade server. That is, port 1 and port 2 are
connected to blade server 1, and users can access blade server 1 through port 1 or port 2. Port 3
and port 4 are connected to blade server 3, and users can access blade server 3 through port 3 or
port 4, and so on.
Note
•
For the correspondence between the straight-through modules connected to different slots
and the blade server Mezz NICs, see
2.5.1 Connections Between Straight-Through Modules
•
For details about blade server Mezz NIC ports that are connected to straight-through modules,
contact Technical Support.
