7-37
{
To remove the front 4LFF drive backplane, push the locking clip, slide the backplane
rightward, and then pull the backplane out of the chassis, as shown in
.
Figure 7-42 Removing the front 4LFF drive backplane
{
To remove the front 8SFF or 10SFF drive backplane, open the locking clip, slide the
backplane leftward, and then pull the backplane out of the chassis, as shown in
The removal procedure is the same for the 8SFF and 10SFF drive backplanes.
uses the 8SFF server as an example.
Figure 7-43 Removing the front 8SFF or 10SFF drive backplane
{
To remove the front or rear 2SFF driver backplane, open the locking clip, slide the
backplane rightward, and then pull the backplane out of the chassis, as shown in
.
The removal procedure is the same for the front 2SFF SAS/SATA drive backplane, front
2SFF NVMe drive backplane, and rear 2SFF drive backplanes.
2SFF drive backplane as an example.
