7-38
Figure 7-44 Removing the front or rear 2SFF drive backplane
Installing a drive backplane
1.
Install a drive backplane:
{
To install the front 4LFF drive backplane in the 4LFF server, place the backplane in the slot.
Then, slide the backplane leftward until the clip snaps into place, as shown in
.
Figure 7-45 Installing the front 4LFF drive backplane
{
To install the front 8SFF drive backplane in the 8SFF server, place the backplane in the slot.
Then, slide the backplane rightward until the clip snaps into place, as shown in
To install a front 10SFF drive backplane in the 10SFF server, use the same method as
8SFF drive backplane installation.
uses the 8SFF SAS/SATA drive backplane
as an example.
