7-15
Figure 7-17 Removing the flash card on the Mezzanine storage controller
6.
Pull the clip on the supercapacitor holder, take the supercapacitor out of the holder, and then
release the clip, as shown in
. The removal procedure is the same for all types of
supercapacitors.
NOTE:
For simplicity, the figure does not show the supercapacitor cable.
Figure 7-18 Removing the supercapacitor
7.
Lift the retaining latch at the bottom of the supercapacitor holder, slide the holder to remove it,
and then release the retaining latch, as shown in
. The removal procedure is the
same for all types of supercapacitor holders.
