background image

 

14-22 

[Sysname-ui-vty0] history-command max-size 20 

# Set the timeout time to 6 minutes. 

[Sysname-ui-vty0] idle-timeout 6 

z

 

Configure the authentication scheme 

Configure the authentication server by referring to related parts in 

AAA 

in the 

Security Configuration 

Guide

 

 

The IPv6 Telnet command is 

telnet ipv6 

{

 ipv6-address

 | 

hostname

 } [ 

-i

 

interface-type

 

interface-number

 ] [ 

port-number 

]. 

 

Logging In Through SSH 

Secure Shell (SSH) offers an approach to logging into a remote device securely. With encryption and 

strong authentication, it protects devices against attacks such as IP spoofing and plain text password 

interception. For the security features provided by SSH, see 

SSH2.0 

in the 

Security Configuration 

Guide

 

 

At present, only APs that support 802.11n support SSH login. 

 

Configuring Command Authorization 

By default, command level for a login user depends on the user level. The user is authorized the 

command with the default level not higher than the user level. With the command authorization 

configured, the command level for a login user is decided by both the user level and AAA authorization. 

If a user executes a command of the corresponding user level, the authorization server checks whether 

the command is authorized. If yes, the command can be executed. 

The authorization server checks the commands authorized for users through the username, and thus 

the command authorization configuration involves four steps: 

Step1 

Configure the authentication mode as 

scheme 

(In other words,

 

use username and password are 

required for authentication) when users log in. 

Step2 

Enable command authorization. For more information, see the following table. 

Step3 

Configure a RADIUS scheme. Specify the IP addresses of the RADIUS authorization servers and 

other related parameters. For more information, see 

AAA

 in the 

Security Configuration Guide

Step4 

Configure the ISP domain to use the RADIUS scheme for command line users. For more information, 

See 

AAA 

in the 

Security Configuration Guide

Follow these steps to enable command authorization: 

Summary of Contents for WA Series










































































































































Reviews: