Installation Manual
H3C WA2200 Series WLAN Access Points
Chapter 3 Installation of Indoor APs
3-5
Follow these steps to lock the AP onto the wall-mounting bracket:
1) Insert the locking plate into the security slot on the top of the AP (see (1) in Figure
3-6 and Figure 3-7).
2) Turn the locking plate counterclockwise until the hole on the locking plate is
aligned with the hole in the wall-mounting bracket (see (2) in Figure 3-6 and Figure
3-7).
3) Put the latch through the two holes that are aligned in step 2 (see (3) in Figure 3-6
and Figure 3-7).
4) Lock the latch with a lock.
Figure 3-6
Lock the indoor AP onto the wall-mounting bracket
